|
2. Applicable to all kinds of rubber raw materials, silicone and fluorine glue can also be used, rubber compound injection temperature is relatively high, can shorten the curing time
3. The first plasticized compound is first injected, the time of injection of a compound in the injection barrel to stay the same time, to avoid the first access to the compound because of the injection cartridge in the residence time is too long and premature curing phenomenon
4. The injection column can be moved outside the injection cartridge, greatly simplifying the operation of the compound replacement
5. Metering back pressure consistent, high injection accuracy
Fully Automatic Vertical FIRST IN FIRST OUT Injection Moulding Machine
1. Mechanical design: the base of the use of special mechanical design, good plane accuracy, finished product appearance of the United States, good quality.
2. Feeding system: a special two-stage feed design, can make the best raw material exhaust effect, but also the function of dead material.
3. Injection volume control: the use of high-precision German electronic design, can accurately control and calculate the size of the injection
The
4. Cold runner technology: supporting mold to provide water circulation mold temperature control machine, to achieve cold runner technology, effectively prevent the occurrence of dead material, reduce the loss of rubber raw materials.
5. In-mold vacuum design: With imported vacuum pump, can provide mold vacuum function, to ensure product quality, improve product yield.
6. Safety design: with the Japanese high-tech infrared safety electric eye, and has a fully automatic protection settings, can clearly grasp the status of the machine to ensure safety.
7. Oil design: the use of full-scale oil system, low noise and automatic adjustment of the proportion of the size of the function, accurate and stable.
|
Type |
200Ton |
300Ton |
400Ton |
|
Injection part |
|
|
|
|
Injection plunger diameter（mm） |
75 |
90 |
110 |
|
Injection pressure（Kgf/c㎡) |
1650 |
1900 |
2200 |
|
Theoretical injection volume（c㎡） |
2000 |
3000 |
4000 |
|
Screw diameter（mm） |
40 |
45 |
50 |
|
Screw speed（rpm） |
0-90 |
0-120 |
0-120 |
|
Mold part |
|
|
|
|
Clamping force（KN） |
2000 |
3000 |
4000 |
|
Open stroke（mm） |
380 |
450 |
550 |
|
Minimum die thickness（mm） |
90 |
100 |
120 |
|
Hot plate spacing（mm） |
550 |
550 |
550 |
|
Column spacing（mm） |
690*300 |
820*310 |
940*920 |
|
Hot plate size（mm） |
560*560 |
700*700 |
850*850 |
|
Power part |
|
|
|
|
Motor power（KW） |
11 |
15 |
15 |
|
Electric power（KW） |
16 |
24 |
20 |
|
Vacuum pump powerKW） |
1 |
1 |
1 |
|
Mold temperature power（KW） |
6 |
6 |
6 |
|
System pressure（kgf/c㎡) |
200 |
200 |
200 |
|
Others |
|
|
|
|
Weight（Ton) |
约6 |
约9 |
约11.5 |
|
Overall size：L*W*H（mm） |
1850*2900*3750 |
2200*3300*4200 |
2600*3600*4500 |
